Go to homepage
Thermo Elect.LED GmbH (HaakeTC

Water jet pumps

Article number: 9303310

€206.00*

Packaging unit: 1 piece

Available

Manufacturer Article Number
Type
Filter
   Available
  
   on order
Product information "Water jet pumps"
Matt chrome-plated brass and plastic.
For low pressure.
Can be completely disassembled. Each pump is supplied with an intermediate adapter, which acts as a rapid coupling between the suction tubing and pump. Adapter fits tubing internal diameters between 8 and 13 mm. A short length of tubing can be attached to the discharge nozzle.

Required water pressure:
approx. 0.5 bar
Water consumption:
330 L / hr.
Ultimate pressure:
12 mbar.
Manufacturer Article Number: 9050001
Type: With tubing connectionand 2 tubing clamps

Other customers also bought

Water jet pumps, PP
With constant ultimate vacuum, high suction flow rate and very low water consumption. Can be connected to mains water system in a number of different ways using the adapter supplied and reducing adapters that are available as accessories. For continuous use at temperatures up to 80°C max. High chemical resistance as the media being pumped only comes into contact with PP, FKM and PTFE. Integral non-return valve increases safety.Comprises: Water jet pump, including:Mains water connections: R ¾" sleeve nut, R ½" reducing adapter and flexible tubing connection (nozzle) with external diameter from 10mm to 12mm.Vacuum connection: Detachable nozzle with external diameter from 6mm to 9mm and GL 14 screw cap.Performance characteristics at 3.5 bar water supply pressure at 12°CWater consumption:190L/hr.Ultimate vacuum:16 mbarFlow rate at atmospheric pressure:400L/hr. free air
Variants from €48.80*
Water jet pump acc. to Friedrichs-Antlinger, borosilicate glass 3.3
With spiral ejector for high suction capacity, speciications (at 4 bar water pressure): water consumption: 10 l/min, low rate: 400 ml/s, non-return safety: up to 1 kg/cm³, ultimate pressure: 16 mbar, material: borosilicate glass 3.3
Variants from €104.30*