Kern & Sohn GmbH
Shore hardness testers, analogue, HB
Article number: 6312365
Product information "Shore hardness testers, analogue, HB"
Shore hardness testers for hardness determination of plastics through penetration measurement
Shore A for rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar materials
Shore A0 for foams, sponges
Shore D for plastics, synthetic resin, Resopal®, epoxides, Plexiglas® etc.
Compact handheld durometer for plastics with drag indicator.
- Typical application: Measurement of penetration depth (Shore).
- Material thickness of the sample, min. 4 mm
- Particularly recommended for internal comparison measurement. Standard calibrations e. g. to DIN 53505 are not possible because of very narrow standard tolerances
- Can be attached to the test stands TI-AC (for Shore A and Shore A0) and TI-D (for Shore D)
Shore A for rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar materials
Shore A0 for foams, sponges
Shore D for plastics, synthetic resin, Resopal®, epoxides, Plexiglas® etc.
- Max mode: Holds the maximum value in the display
- Point mode: Shows one instant value
- Screws to screw on to the TI: M7 fine thread
- Delivered in a plastic carrying case
Specifications | |
Precision: | 3 % of max. measured value |
Dimensions (W x D x H): | 60 x 25 x 115 mm |
Net weight: | approx. 160 g |
Dual Use: | 0 |
---|---|
Manufacturer Article Number: | HB0 100-0 |
Measuring range HS: | 100 HA0 |
Readability HS: | 1,0 HA0 |
Type: | HB0 100-0 |