![Tintometer GmbH Tintometer GmbH](https://www.haeberle-lab.de/media/33/ca/58/1724341713/d3c71ef07f1bff9f47f60d8a6d9c4bf6.jpg)
Multiparameter meters SD 335
Article number: 4678204
Product information "Multiparameter meters SD 335"
Depending on the set, the portable multi-parameter measuring device is ideally suited for the precise determination of pH, redox, temperature, conductivity / TDS / salinity as well as saturation and concentration of dissolved oxygen.
Scope of supply: Meter, protective armouring, electrode holder for 2 electrodes, pH/temp. electrode type 231, pH buffer (4.01 / 7.00 / 10.01), storage solution for pH/ORP electrodes, 3 x AAA-NiMH rechargeable batteries, user manual
SD 335 Multi (Set 1) pH / Con / Temp. additionally: Conductivity electrode LC 12 (< 200 mS/cm), conductivity solution 1413 µS/cm (NIST)
SD 335 Multi (Set 2): pH / DO / Temp. additionally: Galvanic oxygen sensor (2 m cable), refill electrolyte, membrane heads, calibration bottle with sponge
SD 335 Multi (Set 3): pH / Con / DO / Temp. additionally: Conductivity electrode LC 12 (< 200 mS/cm), conductivity solution 1413 µS/cm (NIST), galvanic oxygen sensor (2 m cable), refill electrolyte, membrane heads, calibration bottle with sponge
- Intuitive user interface thanks to graphical LCD display
- Simultaneous determination of up to three parameters due to galvanic isolation
- Selection between multi-parameter display or single value display
- Setting of alarm limits for parameter monitoring
- Micro-USB connection for software-free data transmission and power supply
- Data logger records measurement data incl. time stamp and measuring point ID in a fixed time interval or manually at the push of a button
- Automatic recognition of standard solutions
- Evaluation of the sensor quality after calibration
- Rechargeable NiMH batteries
Scope of supply: Meter, protective armouring, electrode holder for 2 electrodes, pH/temp. electrode type 231, pH buffer (4.01 / 7.00 / 10.01), storage solution for pH/ORP electrodes, 3 x AAA-NiMH rechargeable batteries, user manual
SD 335 Multi (Set 1) pH / Con / Temp. additionally: Conductivity electrode LC 12 (< 200 mS/cm), conductivity solution 1413 µS/cm (NIST)
SD 335 Multi (Set 2): pH / DO / Temp. additionally: Galvanic oxygen sensor (2 m cable), refill electrolyte, membrane heads, calibration bottle with sponge
SD 335 Multi (Set 3): pH / Con / DO / Temp. additionally: Conductivity electrode LC 12 (< 200 mS/cm), conductivity solution 1413 µS/cm (NIST), galvanic oxygen sensor (2 m cable), refill electrolyte, membrane heads, calibration bottle with sponge
Specifications | |
pH: | -2.00 ... 16.00 pH |
mV: | -2000 ... 2000 mV |
Conductivity: | 0.000 ... 500 mS/cm |
TDS: | 0.000 ... 500 g/l |
Salinity: | 0.0 ... 70.0 PSU |
O2-concentration: | 0.00 ... 50.00 mg/l |
O2-saturation: | 0.0 ... 500.0 % |
Temperature: | -10.0 ... 110.0 °C |
Data logger: | 8 GB |
Interface: | Micro-USB |
Dimensions (W x D x H): | 100 x 164 x 37 mm |
Weight: | 310 g |
Power supply: | 3 x AAA NiMH rechargeable batteries, Micro-USB |
IP code: | IP 67 |
Dual Use: | 0 |
---|---|
Manufacturer Article Number: | 724800 |
Type: | SD 335 Multi (Set 1) pH / Con / Temp. |