Quick delivery
BartelsRieger
Respiratory Protection - Plug-In Filters for Half Mask 620 N and 620 S
Article number: 6070130
on request
Product information "Respiratory Protection - Plug-In Filters for Half Mask 620 N and 620 S"
Tested and approved to EN 143 / EN 14387 standards with CE mark. Insert filters are connected to the mask by a filter adapter. The filter adapter is fitted with thread connector acc. to EN 148-1. Particle filters consist of a light PE housing with a built-in glas fibre filter. Special folding provides a large filter surface area in a confined space. A pre-filter collects aerosol mist and dust and prevents rapid accumulation of dirt particles in the main filter, thereby prolonging its lifespan. Easy to exchange by inserting into the outer chamber of the filter mount. Flame resistant.
Please order the filter adapter for insert filters separately.
Please order the filter adapter for insert filters separately.
| Filter connection: | Plug-in |
|---|---|
| Manufacturer Article Number: | 924100 |
| Material: | Aluminium |
| Sort of filter: | Combined filter |
| Standard: | EN 143 / EN 14387 |
| Type: | 40 ASt |
| Type of filter: | A1 P3 R D |
| UNSPSC: | 46182005 |
Accessories
Filter holder and coarse dust pre-filter for plug-in filters
Filter housing made of plastic, black, two-part, consisting of mount (upper part) and cover (lower part):Socket, approx. 105 mm outer diameter, 48 mm high, with standard thread (DIN EN 148-1) for connection to a mask,with rubber gasket behind the trapezoid internal thread. Covers each approx. 99 mm outer diameter,various heights cover 35 = 44 mm high, cover 70 = 62 mm high,each with trapezoidal male thread and pre-filter chamber with hinged coverFilter holder 5570/35 for filter series 19, 24, 25Filter holder 5570/70 for filters series 34, 39, 40, 45Prefilters trap coarse paint mist and dust and extend service life of particle and combination filtersUncomplicated filter change possible without disassembly from respirator mask
€5.61*